EV305A-A 加拿大Discover出品 6V330AH 6V EV动力牵引电池 升降平台用

Discover® DRY CELL Traction Industrial batteries outperform traditional Flooded, AGM, and Gel deep-cycle batteries in demanding traction and industrial applications. The batteries are designed to deliver a long runtime, high operating current and withstand deep discharge and are ideal for powering equipment that is used multiple times a day.

DRY CELL Traction Industrial batteries have been used and trusted for more than ten years by the world’s largest industrial Original Equipment Manufacturers. Specific charge algorithms are available that support optimal battery performance and longevity.

ERMINAL

LAYOUT

MECHANICAL SPECIFICATIONS

Industry Reference	BCI: 902-305
Length A (in/mm)	11.6	295
Width B (in/mm)	7.1	180
Height C (in/mm)	13.6	345
Total Height D (in/mm)	14.4	365
Weight (lbs/kgs)	101.2	46
Terminal *	AM
Technology	DRY CELL AGM, VRLA

NOTE 1: Dimensions have a ±2 mm (0.08 in) tolerance. Weights may vary.
NOTE 2: Refer to terminal guide on website for torque values.

ELECTRICAL SPECIFICATIONS

Voltage (V)	6
Voltage Cutoff (80% DOD)	5.70
Internal Resistance (mΩ)	1
Short Circuit (A) (20°C / 68°F)	5100
Self-Discharge (20°C / 68°F)	2-3% per month
Charge Temperature	Min: -10°C (14°F) | Max: 50°C (122°F)
Discharge Temperature	Min: -40°C (-40°F) | Max: 50°C (122°F)
Storage Temperature	Min: -20°C (-4°F) | Max: 60°C (140°F)

NOTE 3: Extra considerations must be given when designing systems for use at maximum temperatures.
NOTE 4: Internal Resistance is approximate.

PERFORMANCE SPECIFICATIONSAmp Hours (AH)

3 HR	5 HR	20 HR
260	290	330

3 HR: 1.70VPC; 5 HR: 1.75VPC; 20 HR: 1.80VPC. All at 25°C/77°F

 Minutes of Discharge

@25A	@56A	@75A	@85A	@100A
775	315	220	190	160

FEATURES

HYDRO POLYMER

Organic capillary separators with hydro polymer electrolytes resist dry-out and prevent thermal runaway

Maintains performance characteristics over operational life

ENHANCED ALLOYS

Thick plates with graphite enhanced alloys deliver maximum runtime over operational life

CARBON BOOST

Carbon additives to increase duty cycle performance, charge acceptance and partial state of charge operation

AUTOMATED THROUGH-THE-PARTITION WELD

Improved intercell weld consistency, and less lead waste than manual welding process (key models)

Supports higher current loads and lowers internal resistance

POLYPROPYLENE CASE

High heat resistance and durability (key industry models)

High precision pressure relief valves reduce water loss and extend life

Integrated flame arrestors prevent fire and explosion

BENEFITSENHANCED RUNTIME

High amp hour capacity

High operational voltage over lifetime

Delivers 80% DoD above 1.9 VPC

EXTENDED SERVICE LIFE

Long life superior to deep-cycle FLA / AGM / Gel batteries

550+ cycles 70% DoD (IEC 254-1 Traction Lead-Acid)

350+ cycles **** DoD (DIN 43 539 VRLA)

RESILIENCE

Partial stage of charge operation superior to AGM

Intense duty cycling superior to AGM / Gel

Overcharge and over-discharge resilience superior to AGM

Compatible with AGM / Gel semi-traction charge profile

EXTREME TEMPERATURES

High temperature life superior to AGM

Low temperature operation superior to FLA / AGM / Gel batteries

EXTREME VIBRATION RESISTANCE

Vibration resistance superior to AGM / Gel

Shock tested (IEC 61373, DIN EN 61373, SAE J537)

OEM TRUSTED

Exceeds OEM specifications

Innovative technology

Global service and support

RELIABLE AND SAFE

Valve Regulated Lead-Acid, Dry Cell AGM

Maintenance-free, nonspillable, no-gassing

Spark and explosion tested (SAE J1495)

CERTIFIED QUALITY

Discover® manufacturing facilities are fully certified to ISO 9001/14001 and OSHA 18001 standards.

Designed in accordance with and published in compliance with applicable standards, including:

IEC 60254-1. Lead-Acid Traction

DIN 43 539. VRLA

SAE J537. Storage

UL, CE Health Safety Certified